The Bio rotary spray heads are suitable for small to medium sized process vessels where moderate cleaning is needed. The spray heads are low pressure devices, where rotation is powered by the eccentric flow of the cleaning liquid through the spray head. A limited amount of cleaning liquid is required to efficiently remove residues.

The Rotary Spray Heads range is completely self-cleaning both on the inside and the outside, as well as self-draining. It has a 360° spray pattern. Thanks to its simplified and effective design, it can be used in a wide range of applications and can be installed in any position or angle.

The Scanjet Bio 7SB is a very efficient replacement for traditional static spray ball devices, offering 360° impact coverage, self-cleaning and self-draining features.  The patent-pending Bio 7SB design follows EHEDG and GMP guidelines, and can be supplied with EN10204-2.1, 2.2 or 3.1 material and FDA 21CFR compliance certificates.  The Scanjet Bio 7SB-XXX-A clip-on and weld-on versions have also attained 3A certification under the sanitary standard 78-01.

This new type of fluid-bearing rotary spray ball is fast becoming the first choice for customers looking to take their CIP tank cleaning system performance to the next level, saving water / cleaning fluid while at the same time improving the cleaning efficiency.  The Bio 7SB is easy to install, with a choice of either a pin, weld-on or threaded connection.  Due to the inherently durable design, the life time of fluid-bearing cleaning devices can be two to three times that of traditional ball-bearing cleaning devices.

Key Features:
  • Rotating spray
  • 360° spiral cleaning
  • Ideal for small to medium-sized tanks
  • Low pressure requirement
  • Low cleaning fluid volume
  • Mixing vessels
  • Reactors
  • Yeast tanks
  • IBC’s
  • Beverage tanks
  • Paint manufacturing
  • Dairy process vessels
Get a quote