Scanjet Bio 2SB
The Bio rotary spray heads are suitable for small to medium sized process vessels where moderate cleaning is needed. The spray heads are low pressure devices, where rotation is powered by the eccentric flow of the cleaning liquid through the spray head. A limited amount of cleaning liquid is required to efficiently remove residues.
The Rotary Spray Heads range is completely self-cleaning both on the inside and the outside, as well as self-draining. It has a 360° spray pattern. Thanks to its simplified and effective design, it can be used in a wide range of applications and can be installed in any position or angle.
The Scanjet Bio 2SB is a very efficient replacement to traditional static cleaning devices, offering 360° impact coverage, self-cleaning and self-draining. The patent pending Bio 2SB design follows EHEDG and GMP guidelines, and can be supplied with EN10204-2.1, 2.2 or 3.1 material and FDA 21CFR compliance certificates.
This new type of slide bearing Rotary Spray Head is becoming the first choice for customers looking to improve their CIP tank cleaning systems, capable of saving water while at the same time increasing the efficiency of the cleaning process. The Bio 2SB is easy to install and comes with either a pin, weld-on or threaded connection. The lifetime of fluid bearing cleaning devices such as the Bio 2SB is two to three times compared to what traditional ball bearing cleaning devices offer.